Installation Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Install the collar to the bulb and lock the spring (1).
The collar (1) is to install together with the bulb.
To lock the bulb (1), rotate the bulb clockwise.
Install the connector to the bulb and install Xenon cable, lock the spring (1).
To lock the cap (1), rotate the cap clockwise.
- Connect the negative cable. Refer to Battery Negative Cable Disconnection and Connection .