LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Lighting System - Repair Instructions) >> Repair Instructions >> Headlamp Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2190692

    Bracket 5: Screw the bracket (1) on through the encircled hole (2).

  2. GM2190689

    Bracket 4: Screw the bracket (1) on through both encircled holes (2) (one screw from each side).

  3. GM2190688

    Bracket 3: Screw the bracket (1) on through the encircled holes (2).

  4. GM2190686

    Bracket 2: Screw the bracket (1) on through the encircled holes (2).

  5. GM2190683

    Bracket 1: Screw the bracket (1) on through the encircled holes (2).

  6. Install the headlamp. Refer to Headlamp Replacement .
scientia non olet · About LEMON Manuals