LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Seat Belt System) >> Diagnostic Information and Procedures >> Seat Belt Indicator Malfunction - Rear >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that all connectors are fully seated.
  2. With the scan tool monitor the 2nd Row Seat Belt Status parameter while buckling and unbuckling the seat belt. The parameter should display Buckled and Unbuckled when buckling and unbuckling the seat belt.
    • If the parameter does not display Buckled and Unbuckled when buckling and unbuckling the seat belt 

      Replace the P9 driver information center.

    • Go to next step: If the parameter does display Buckled and Unbuckled when buckling and unbuckling the seat belt 

      Go to next step: Refer to Circuit/System Testing.

scientia non olet · About LEMON Manuals