LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Seat Belt System) >> Diagnostic Information and Procedures >> DTC B173A, B173B, B173D, or B173E >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

B173A 02, B173D 02 

The folding top control module detects a short to ground on the seat belt presenter position sensor signal circuit.

B173B 02, B173E 02 

The folding top control module detects a short to ground on the seat belt presenter motor control circuit.

B173A 08, B173D 08 

The folding top control module does not detect a change in the seat belt presenter position sensor signal when a motion of the seat belt presenter motor has been commanded.

B173B 04, B173E 04 

The folding top control module detects an open on the seat belt presenter motor control circuit.