X905 Rear Compartment Lid Extension Harness to Rear Compartment Lid Harness

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY	Courtesy of GENERAL MOTORS COMPANY
Connector Part Information Harness Type: Rear Compartment Lid Extension OEM Connector: Not Available Service Connector: Service by Harness - See Part Catalog Description: 11-Way F	Connector Part Information Harness Type: Rear Compartment Lid OEM Connector: 30331101 Service Connector: Service by Harness - See Part Catalog Description: 11-Way M 1.5, 5.8 Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-2A (GY)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	Not Required	J-35616-3 (GY)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.5	VT/GY	1303	I	-	Lift Gate Ajar Switch Signal 1	1	0.5	VT/GY	1303	II	-
2 - 3	-	-	-	-	-	Not Occupied	2 - 3	-	-	-	-	-
4	0.75	BU/VT	1335	I	-	Right Rear Turn Signal Lamp Control	4	0.75	BU/VT	1335	II	-
5	0.5	VT/YE	5357	I	-	Right Tail Lamp Outage Detection Signal	5	0.5	VT/YE	5357	II	-
6	0.5	YE/BK	5356	I	-	Left Tail Lamp Outage Detection Signal	6	0.5	YE/BK	5356	II	-
7	0.75	BU/WH	1334	I	-	Left Rear Turn Signal Lamp Control	7	0.75	BU/WH	1334	II	-
8	-	-	-	-	-	Not Occupied	8	-	-	-	-	-
9	0.5	YE/BU	5797	I	-	Rear Closure Handle Switch Open Signal	9	0.5	YE/BU	5797	II	-
10 - 11	-	-	-	-	-	Not Occupied	10 - 11	-	-	-	-	-