LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Inline Harness Connector End Views (X310-X910)) >> Inline Harness Connector End Views >> X454 Power Folding Top Harness to Body Harness

X454 Power Folding Top Harness to Body Harness

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2042938Courtesy of GENERAL MOTORS COMPANY
GM2042939Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Power Folding Top
  • OEM Connector: Not Available
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 6-Way F
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13125599
  • Service Connector: 93185233
  • Description: 6-Way M 2.8 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required No Tool Required No Tool Required Not Required Not Required Not Required Not Required
II Not Required J-35616-5 (PU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 2.5 BN/VT 293 I - Rear Defog Element Control 1 2.5 BN/VT 293 II -
2 2.5 BK 550 I - Ground 2 2.5 BK 550 II -
3 0.5 YE 4466 I - Soft Top Tonneau Cover Sensor Low Reference 3 0.5 BK/WH 4466 II -
4 0.5 BN 4420 I - Soft Top Tension Bow Down Sensor Signal Right 4 0.5 WH/YE 4420 II -
5 - 6 - - - - - Not Occupied 5 - 6 - - - - -