LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Folding Rear Seat Back Cushion Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rear Seat Back Latch Bezel Replacement  - Remove
  2. GM3764184

    Remove the 8 rear seat back latch assembly bolts (1).

  3. GM3764183

    Remove the rear seat back latch assembly (1).

  4. GM3764180

    Remove the 4 folding rear seat back cushion actuator fastener (1) from the rear seat back latch assembly (2).

  5. GM3764149

    Remove the folding rear seat back cushion actuator (1, 2) from the rear seat back latch assembly (3).

  6. Clip out the folding rear seat back cushion actuator (1, 2) from the folding rear seat back cushion actuator bowden cable (4).
scientia non olet · About LEMON Manuals