LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Folding Rear Seat Back Cushion Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3764149

    Clip in the folding rear seat back cushion actuator (1, 2) to the folding rear seat back cushion actuator bowden cable (4).

  2. Install the folding rear seat back cushion actuator (1, 2) to the rear seat back latch assembly (3).
  3. GM3764180
    CAUTION:

    Refer to:Fastener Caution .

    Install and tighten the 4 folding rear seat back cushion actuator fastener (1) to the rear seat back latch assembly 2.5 N.m (22 lb in).

  4. GM3764183

    Install the rear seat back latch assembly (1).

  5. GM3764184

    Install the 8 rear seat back latch assembly bolts and tighten to (1) 22 N.m (16 lb ft).

  6. Rear Seat Back Latch Bezel Replacement  - Install
scientia non olet · About LEMON Manuals