LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Head Restraint Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the seat back cushion cover.
  2. GM4879059

    Disconnect the head restraint cable (1) from the head restraint actuator.

  3. GM4879054

    Note the location and routing of the cable (1) prior to removal to ensure proper installation.

  4. GM4879046

    Raise the head restraint (3) to gain access to the head restraint guide bezel (1).

  5. Twist the head restraint guide bezel (1) counter clockwise and push the bezel upward on the head restraint adjuster rod.
  6. Using a suitable pointed or flat bladed tool, push the metal clip (2) rearward while pulling upward on the head restraint (3).
  7. Remove the head restraint (3) from the seat.
scientia non olet · About LEMON Manuals