LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Tires And Wheels) >> Repair Instructions >> Tire Valve Stem Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle on a suitable support. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire/wheel assembly from the vehicle. Refer to Tire and Wheel Removal and Installation .
  3. Dismount the tire from the rim. Refer to Tire Dismounting and Mounting .
  4. GM1748887
    NOTE:

    When servicing the tire valve always use a new TORX screw during installation.

    Remove the TORX screw (1) from the tire pressure monitoring (TPM) sensor (2) and pull it straight off the tire pressure valve stem (3).

    5. CAUTION:

    Do not scratch or damage the clear coating on aluminum wheels with the tire changing equipment. Scratching the clear coating could cause the aluminum wheel to corrode and the clear coating to peel from the wheel.

  5. Remove the tire pressure valve stem by pulling it through the rim.
scientia non olet · About LEMON Manuals