Final Inspection
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Mount the tire to the wheel. Tire Dismounting and Mounting
- After mounting and inflating the tire, check both beads, the repair and the valve stem with a water and soap solution in order to detect leaks.
- If the tire continues to lose air, the tire must be dismounted and inspected again.
- Balance the tire and wheel assembly. Tire and Wheel Assembly Balancing - Off Vehicle
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.
For additional tire puncture repair information, contact:
Rubber Manufacturers Association (RMA)
1400 K Street, N.W., Suite 900
Washington
DC
20005-2403
Telephone: 202-682-4800
E-mail: info@rma.org
Website: www.rma.org