General Refinishing Procedures - Installation
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Unmask the wheels.
- Clean all wheel mounting surface of any corrosion, overspray, or dirt.
- Install NEW coated balance weights at marked locations.
- Install wheels on vehicle.
NOTE:
When re-balancing a tire on an aluminum wheel, coated balance weights must be used in order to reduce the chance of future cosmetic damage.
NOTE:
Use a torque stick on an impact wrench, or a torque wrench to consistently and uniformly fasten the wheel to the specified torque for the vehicle. The star pattern must be followed.