Fastener Specifications
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Master Cylinder Nut | 50N.m(37 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose to Brake Caliper Bolt | 40 N.m (30 lb ft) |
| Brake Master Cylinder Reservoir Bolt | 2.5 N.m (22 lb in) |
| Brake Pedal Bracket Bolt | 20 N.m (15 lb ft) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Bracket Bolt | 20 N.m (15 lb ft) |
| Clutch Master Cylinder Nut | 18 N.m (13 lb ft) |
| Engine Wiring Harness Bracket Nut (at Vacuum Pump) | 9 N.m (80 lb in) |
| Master Cylinder Primary Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Rear Brake Hose Bracket Bolt | 9 N.m (80 lb in) |
| Power Brake Booster Bolt | 19 N.m (14 lb ft) |
| Power Brake Booster Vacuum Pump Bolt (Electric Pump) | 7.5 N.m (66 lb in) |
| Power Brake Booster Vacuum Pump Bracket Bolt (Electric Pump) | 20 N.m (15 lb ft) |