LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Flushing >> Reverse Flushing Setup

Reverse Flushing Setup

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Reverse flow refrigerant flush is recommended for desiccant bag failure. Replace condenser/receiver dehydrator assembly when A/C flush is complete and perform the following procedure:

    NOTE:

    Inspect and lubricate GE-45268  adapter kit fitting O-rings. Refer to Air Conditioning O-Ring Seal Replacement .

  1. Install both GE-45268-9  fitting O-ring onto GE-45268-10  adapter.
  2. Install GE-45268-8  fitting O-ring onto suction side of GE-45268-10  adapter.
  3. Install GE-45268-7  fitting O-ring onto discharge side of GE-45268-10  adapter.
scientia non olet · About LEMON Manuals