LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning System Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.
    2. NOTE:

    Cap or tape the open A/C refrigerant components immediately to prevent system contamination.

  2. Cap or tape the A/C refrigerant components.
  3. GM2611419

    Remove the sealing washer (1) from the A/C refrigerant component.

  4. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
  5. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    6. NOTE:

    DO NOT reuse sealing washer.

  6. DISCARD the sealing washer.
scientia non olet · About LEMON Manuals