LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Condenser Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2028079

    Install the condenser (1).

  2. Install the A/C refrigerant pressure sensor. Refer to Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement .
  3. GM2028076
    CAUTION:

    Refer to Fastener Caution .

    Install the condenser hose (1) and the evaporator hose (2) and the 2 condenser hose nuts and tighten to 19 N.m (14 lb ft).

  4. GM2028073

    Install the air intake duct (1).

  5. Install the headlamp - right side. Refer to Headlamp Replacement .
  6. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  8. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .