Fastener Specifications
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Column Nut | 22 N.m (16 lb ft) |
| Steering Wheel Bolt | 45 N.m (33 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Intermediate Steering Shaft Upper and Lower Bolt | 34 N.m (25 lb ft) |
| Steering Column Lower Trim Cover Bolt | 2.5 N.m (22 lb in) |
| Steering Wheel Pad Accessory Wiring Harness Bolt | 5.5 N.m (49 lb in) |