LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Interior Trim And Interior Paneling) >> Repair Instructions >> Quarter Upper Trim Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2966381
  1. Pull the seat belt (1) through the quarter upper trim panel.
  2. Install the quarter upper trim panel (3).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the 3 quarter upper trim panel bolts (2).
  4. Reposition the rear seat.
  5. GM4377201

    Pull the seat belt (2) through the seat belt reach assist arm.

  6. Slightly push the seat belt reach assist arm (1) to the quarter upper trim panel as shown in the graphic.
  7. Install the front seat belt to the front seat belt retractor. Refer to Front Seat Belt Retractor Replacement .
  8. Install the body side front lower trim panel. Refer to Body Side Front Lower Trim Panel Replacement .
scientia non olet · About LEMON Manuals