Steering Wheel Airbag Coil Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .
1	Steering Wheel Inflatable Restraint Module Coil Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 1.5 N.m (13 lb in)
2	Steering Wheel Inflatable Restraint Module Coil Procedure Disconnect any electrical connectors as needed. Transfer the steering angle sensor. Refer to Steering Angle Sensor Replacement . Do not remove the centering tab from a new steering wheel inflatable restraint module coil until it has been installed or re-centering will be required. If re-centering of the steering wheel inflatable restraint module coil is needed then refer to Airbag Steering Wheel Module Coil Centering .

Callout

Component Name

Preliminary Procedures

Remove the steering wheel. Refer to Steering Wheel Replacement .
Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .

Steering Wheel Inflatable Restraint Module Coil Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
1.5 N.m (13 lb in)

Steering Wheel Inflatable Restraint Module Coil

Procedure

Disconnect any electrical connectors as needed.
Transfer the steering angle sensor. Refer to Steering Angle Sensor Replacement .
Do not remove the centering tab from a new steering wheel inflatable restraint module coil until it has been installed or re-centering will be required.
If re-centering of the steering wheel inflatable restraint module coil is needed then refer to Airbag Steering Wheel Module Coil Centering .