LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Roll Bar Replacement (Deployed) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4182418

    Install the roll bar (2).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install and tighten the 4 roll bar bolts (1) to 36 N.m (27 lb ft).
  3. GM4182417

    Connect the electrical connector.(1)

  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
  5. Install the rear floor panel opening cover. Refer to Rear Floor Panel Opening Cover Replacement .
  6. Folding Top Stowage Compartment Cover Replacement - Replace
  7. Bring the folding top to the first service position. Refer to Folding Top Positions Overview .
scientia non olet · About LEMON Manuals