Fastener Specifications
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Floor Console Bolt | 2.5N.m(22 lb in) |
| Front Floor Console Cover Bolt | 2.5 N.m (22 lb in) |
| Heater and Air Conditioning Evaporator and Blower Module Fastener | 5.m (44 lb in) |
| Instrument Panel Bolt | 4 N.m (35 lb in) |
| Instrument Panel Center Trim Panel Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Compartment Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Instrument Cluster Hood Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Lower Airbag Bracket Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Lower Trim Panel Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Tie Bar Brace Bolt | 22 N.m (16 lb ft) |
| Instrument Panel Tie Bar Fastener | 22 N.m (16 lb ft) |