LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Wiring Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
  2. GM2027818

    Remove instrument panel wiring harness (2) from instrument panel tie bar (1).

    Disconnect electrical connectors.

scientia non olet · About LEMON Manuals