Instrument Panel Tie Bar Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Front Side Door Sill Trim Plate Replacement Instrument Panel Wiring Harness Replacement Instrument Panel Tie Bar Brace Replacement Floor Front Air Outlet Duct Replacement - Left Side Steering Column Replacement Brake and Accelerator Pedal Assembly Replacement Instrument Panel Outer Air Outlet Duct Replacement - Left Side Instrument Panel Outer Air Outlet Duct Replacement - Right Side
1	Instrument Panel Tie Bar Fastener (Qty: 12) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Heater and Air Conditioning Evaporator and Blower Module Fastener (Qty: 3) Tighten 5 N.m (44 lb in)
3	Instrument Panel Tie Bar Procedure Note location and routing of the I/P wiring harness prior to removal of the I/P tie bar assembly to ensure proper reinstallation. With the aid of an assistant, remove the I/P tie bar assembly from the vehicle. If replacing the I/P tie bar assembly, transfer all necessary components.