Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Ensure that the steering wheel is set in a straight ahead position.
- Loosen the tie rod jam nut (1).
- Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications .
- Tighten the tie rod jam nut (1) to 60 N.m (44 lb ft).
- Center the steering angle sensor. Refer to Steering Wheel Angle Sensor Centering .
CAUTION:
Refer to Fastener Caution .