Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, connect an appropriate device to the X80 Accessory Power Receptacle or E32 Cigarette Lighter Recptacle.
- Verify the device is powered by the X80 Accessory Power Receptacle or E32 Cigarette Lighter Recptacle.
- If the device is not powered
Refer to Circuit/System Testing
- Go to next step: If the device is powered
- If the device is not powered
- All OK.