LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Rear Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2191323

    Install rear transmission mount.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install rear transmission mount to frame bolts (1) and nuts (2) and tighten to 110 N.m (81 lb ft).
  3. Install rear transmission mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .
  4. Install steering gear - EPS. Refer to Steering Gear Replacement .
scientia non olet · About LEMON Manuals