LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2027419

    Install the transmission mount (3).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 2 transmission mount bolts (1) and tighten to 62 N.m (46 lb ft).
  3. Install the transmission mount nut (2) and tighten to 62 N.m (46 lb ft).
  4. GM2027418
    CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

    Install the 3 NEW transmission mount bolts (1) and tighten a first pass to 50 N.m (37 lb ft).

  5. Tighten the 3 NEW transmission mount bolts (1) a final pass to an additional 60 - 75 degrees, using the EN-45059  meter.
  6. Remove the engine lifter.
  7. Install the battery tray. Refer to Battery Tray Replacement .
scientia non olet · About LEMON Manuals