LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Drain and Fill >> Filling Procedure

Filling Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the vehicle.
  2. Without disconnecting the electrical connector, remove the engine control module and hang aside. Refer to Engine Control Module Replacement .
  3. GM2371617

    Remove the transmission vent hose (2) and the fluid filler cap (1).

  4. Fill the transmission with the proper amount of the correct fluid. Refer to Transmission General Specifications (6T40/6T45/6T50) , and Approximate Fluid Capacities (6T40/45/50) .
  5. Install the fluid filler cap (1) and the transmission vent hose (2).
scientia non olet · About LEMON Manuals