LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake and chock the wheels.
  2. Remove the battery tray. Refer to Battery Tray Replacement .
  3. GM2001179

    Disconnect the range selector cable end (1) from the range selector lever.

  4. Disconnect the range selector cable (2) from the range selector cable bracket.
  5. GM1998668

    Remove the transmission range selector cable bracket bolts (1).

  6. Remove the transmission range selector cable bracket (2).
scientia non olet · About LEMON Manuals