LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Adjustment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Adjust the automatic transmission range selector cable while the transmission and the gear selector are in the park position only. Failure to do so may cause miss-adjustment.

  1. Set the park brake and chock the wheels.
  2. Remove the instrument panel center compartment mat.
  3. Remove the instrument panel lower center compartment. Refer to Instrument Panel Lower Center Compartment Replacement .
  4. GM2191447

    Unlock the range selector lever cable adjust lock (1).

  5. Without disconnecting the electrical connector, remove the engine control module and hang aside. Refer to Engine Control Module Replacement .
scientia non olet · About LEMON Manuals