Output Speed Sensor Replacement
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the control valve body. Refer to Control Valve Body Replacement . |
|
| 1 | Output Speed Sensor Bolt M6 x 18
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 2 | Output Speed Sensor Procedure After installation is complete refer to Control Module References for programming and setup. |