LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM1998841

    Install the 3 input speed sensor seals (1).

  2. Install the input speed sensor (3).
  3. Verify that the retaining tabs are locked completely.
    4. CAUTION:

    Fastener Caution .

  4. Install the input speed sensor bolt (2) M6 x 23 and tighten to 9 N.m (80 lb in).
  5. Install the control valve body. Control Valve Body Replacement 
  6. Perform the transmission adaptive values learn procedure. Transmission Adaptive Values Learn 
scientia non olet · About LEMON Manuals