Ignition and Start Switch Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement
1	Ignition and Start Switch Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Reposition the steering column wiring harness retainers in order to gain access to the switch bolts.
2	Ignition and Start Switch

Callout

Component Name

Preliminary Procedures

Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement

Ignition and Start Switch Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Procedure
Reposition the steering column wiring harness retainers in order to gain access to the switch bolts.

Ignition and Start Switch