LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  3. GM2191905

    Open the front compartment fuse block housing cover (1) and remove the 3 power steering wiring harness nut (2) .

  4. GM2191906
    NOTE:

    Bolts (1) are encapsulated on the end of threads so that they can not be removed from the fuse block.

    Remove the 3 front compartment fuse block bolt (1) and the front compartment fuse block wiring harness supply (2).

  5. Unlock retaining tabs and remove the front compartment fuse block (3).
scientia non olet · About LEMON Manuals