LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2191907

    Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in).
  3. GM2191908

    Install 3 front compartment fuse block bolt (1) and tighten to 7.2 N.m (64 lb in).

  4. GM2191905

    Install the 3 power steering wiring harness nut (2) and tighten to 4.7 N.m (42 lb in).

  5. Close the front compartment fuse block housing cover (1).
  6. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  7. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals