LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Front Compartment Fuse Block Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front compartment fuse block housing.
    1. Install attaching parts
    2. Install 3 connector.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install wiring harness and install nut, tighten to 22 N.m (16 lb ft).
  3. Install windshield washer solvent container filler tube.
  4. Install front compartment fuse block. Refer to Front Compartment Fuse Block Replacement .
scientia non olet · About LEMON Manuals