Instrument Cluster Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Prepare instrument cluster for replacement, refer to Control Module References . Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove headlamp switch molding. Refer to Headlamp Switch Molding Replacement . Remove instrument panel steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement . Remove instrument panel instrument cluster hood. Refer to Instrument Panel Instrument Cluster Hood Replacement .
1	Instrument Cluster Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Cluster Washer (Qty: 2)
3	Instrument Cluster Procedure Disconnect electrical components. After repairs, refer to Control Module References for programming and set up information.