LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Displays And Gauges) >> Diagnostic Information and Procedures >> Driver Information Center Switch Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the driver information center set, up and down function changes when pressing the set, up or down switch.
    • If the driver information center does not change 

      Refer to Set, Up and Down Switch Malfunction

    • Go to next step: If the driver information center changes 
  3. Verify the driver information center menu function changes when pressing the menu switch.
    • If the driver information center does not change 

      Refer to Menu Switch Malfunction

    • Go to next step: If the driver information center changes 
  4. All OK.