Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify no other DTCs are set.
- If other DTCs are set
- Go to next step: If no other DTCs are set
- Replace the K20 Engine Control Module
- Verify DTC P0071 did not set.
- If DTC P0071 is set
Replace the P16 Instrument Cluster
- Go to next step: If DTC P0071 did not set
- If DTC P0071 is set
- All OK.