LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Antilock Brake System) >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement .
  2. GM2028189

    Remove the wheel speed sensor screw (2) from the steering knuckle.

  3. Remove the wheel speed sensor (1).
  4. Remove the wiring harness (3) from the bracket (4).
  5. GM2189141

    Remove the wiring harness (2) retainers (3) from the brake hose (4).

  6. Remove the wiring harness (2) from the body retainer (1).
  7. Replace the body retainer (1).
  8. GM2028202

    Disconnect the electrical connector (1).

  9. Remove wheel speed sensor from the vehicle.
scientia non olet · About LEMON Manuals