LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C0460 or C0710 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Steering Column Position parameter corresponds to the actual steering position as the steering wheel is turned through its entire range of motion.
    • If the parameter does not correspond with the steering wheel position or the reading is erratic 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter reading corresponds with the steering wheel position 
  3. All OK.