Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Test drive the vehicle in a straight line at a speed greater than 40 km/h (25 MPH).
- Verify all scan tool Wheel Speed Sensor parameters are within 1.6 km/h (1 MPH) of each other.
- If any parameter is not within 1.6 km/h (1 MPH) of each other
Refer to Circuit/System Testing
- Go to next step: If each parameter is within 1.6 km/h (1 MPH) of each other
- If any parameter is not within 1.6 km/h (1 MPH) of each other
- All OK.