Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Body Control Module, Traction Control Switch parameter changes between Active and Inactive when pressing and releasing the traction control switch.
- If the parameter does not change
Refer to Circuit/System Testing.
- Go to next step: If the parameter changes
- If the parameter does not change
- All OK.