Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Drive the vehicle in a straight line at a speed greater than 20 km/h (13 MPH).
- Verify all scan tool Wheel Speed Sensor parameters are within 4 km/h (2.5 MPH) of each other.
- If any parameter is not within 4 km/h (2.5 MPH) of each other
Refer to Circuit/System Testing.
- Go to next step: If each parameter is within 4 km/h (2.5 MPH) of each other
- If any parameter is not within 4 km/h (2.5 MPH) of each other
- All OK.