LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC B0000, C0055, C0246, C1207-C1210, C1221-C1228, or C1232-C1235 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC C0035, C0040, C0045, or C0050 is not set.
    • Go to next step: If none of the listed DTCs are set 
  3. Replace the K17 Electronic Brake Control Module.
  4. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
    • If the DTC sets 

      Replace the module that set the DTC.

    • Go to next step: If the DTC does not set 
  5. All OK.