Windshield Garnish Molding Replacement
| Callout | Component Name |
|---|---|
|
CAUTION:
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.
CAUTION:
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced. Preliminary Procedure SIR Disabling and Enabling
. |
|
| 1 | Windshield Garnish Molding Clip Procedure Use a flat bladed plastic tool to remove. |
| 2 | Windshield Garnish Molding Tether Clip Procedure The tether clip MUST be replaced if the clip is damaged. |
| 3 | Windshield Garnish Molding |