LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Repair Instructions >> Heater Inlet Hose Replacement (LTG)

Heater Inlet Hose Replacement (LTG)

Fig 1: Heater Inlet Hose (LTG)
GM4241079Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Drain the cooling system. Refer to Cooling System Draining and Filling (Static)Cooling System Draining and Filling (GE 47716)
1 Heater Inlet Hose Clamp [2x]
Procedure 
Disengage the tension on the heater inlet hose clamps using the BO-38185  hose clamp pliers.
Special Tool 
BO-38185  hose clamp pliers
2 Heater Inlet Hose

Procedure

  1. Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (Static)Cooling System Draining and Filling (GE 47716)
  2. Start the engine and check for coolant leaks.
scientia non olet · About LEMON Manuals