LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Lubricate the hydraulic valve lash adjusters with engine oil. Refer to Adhesives, Fluids, Lubricants and Sealers 
    Fig 1: Hydraulic Valve Lash Adjusters
    GM4299280Courtesy of GENERAL MOTORS COMPANY
    NOTE: If reinstalling, install the hydraulic valve lash adjuster in the previously marked positions.
  2. Hydraulic Valve Lash Adjuster (1) - Install
  3. Hydraulic Valve Lash Adjuster Arm Replacement  - Install
scientia non olet · About LEMON Manuals