LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 1.8L (LKN)) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the crankshaft balancer absorber. Refer to Crankshaft Balancer Absorber Replacement .
  2. Place collecting basin underneath.
  3. Remove the crankshaft front oil seal (1) from the engine front cover, using the EN-45000  remover (2).
    Fig 1: Crankshaft Front Oil Seal
    GM2968029Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals