Warm Up Three-Way Catalytic Converter Installation

WARNING: This page is about a different variant/trim than selected.

Install a NEW catalytic converter gasket. (2)

Fig 1: Warm Up Three-Way Catalytic Converter
Courtesy of GENERAL MOTORS COMPANY
Warm Up Three-Way Catalytic Converter (1) - Install
Catalytic Converter Nut (1) - Install and tighten [4x] 22 N.m (16 lb ft)

Fig 2: Catalytic Converter Nut
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Fastener Caution
Catalytic Converter Brace Bracket Nut (2) - Install and tighten [2x] 22 N.m (16 lb ft)